You always have to be conscious about the message in your printer which says “it’s time to change the cartridge”. You surely dismiss the message and continue printing, is it the right way to do it? Also, after a few days your cartridge is still working. What is the matter with it? So, when the Brother LC107 ink goes really low on the cartridge, your printer refuses to print anything until and unless you replace the cartridge.
So, How To Save Ink?
1. Laser Printer Toner Cartridges: Most of the laser printer toner cartridges are filled with dry ink which is fine enough to be electrostatically attracted to the paper during printer. So, if your toner cartridge has apparently run out, you can shake it off and get several more pages in a print saving text font. With the shake, you enable the cartridge to eject the toner as required.
2. Hairdryer Formula: Well interesting, the hairdryer that you use in your everyday life can be used to squeeze out more ink from your ink cartridges. So whenever you hear to the beep of your printer notifying that ink has run out or is low, hairdryer will come to your rescue. Simply remove the cartridge from the printer and identify the spot where the ink comes out from, then heat up the spot using your hairdryer for 2 to 3 minutes. Let all the blockages open it into the tiny nozzles of the cheap Epson inks. And you are ready to go and print.
3. Managing With Printing Way: Every printer has its way to inform you that the ink cartridges need to be replaced whether with a desktop notification, a flashing light or both. So start using the draft mode while printing as it decreases the speed of the printer and also it uses far less ink than the usual way. Since the texts can be printed in black ink, do not use the color inks for the timing. After, the ink cartridge literally get empty, you can always opt for cheap Epson inks.